Romance Cards - Page 5
Click on small picture to see a larger version of the card
NOTE: Cards are for sale. Email me for information, or for any templates or clip art
|
|
Have and to Hold (R122S)
- Fold black cardstock to 5 1/4" square card
- Cut silver paper 1/4" smaller and attach
- Leaving 1/2" silver border, attach black and white decorative paper to right side of card
- Cut a small piece of black and white diamond paper, tear right edge, and attach to left side of card, overlapping paper.
- Print Congratulations on silver paper and attach to left side of card
- Cut black and white decorative paper into a tag shape, and print names using Scriptina font on vellum. Cut vellum the same shape as tag
- Punch a hole in the top of both pieces and tie sheer ribbon through
- Tie pearls through the hole in a knot
- Print "Have and to Hold" on small scrap, attach a silver jump ring to top, and attach to pearls
- Attach tag to card with foam tape
Decorative Black and White Paper (Dyan Cross) - click here for directions. I printed on rough paper with a laser printer, and some of the ink came off, giving it a sanded appearance. I sprayed with matt acrylic spray to seal.
Copied from a card by Dee Gallimore-Perry in Papercrafts Magazine
|
|
4 Couples Love (R123H)
- Open the 4 couples clip art images in a graphics program (or Word), and arrange to fit a 5 1/4" x 8 1/4" rectangle.
- Print on cream cardstock
- Using Casablanca Antique font at size 100, type letters L-O-V-E, filling with dark red.
- Use a grunge PSP brush to distress the letters, and print on white cardstock (or you can print the letters and use sandpaper to distress)
- Cut out letters, leaving a thin white border
- Attach letters to card with foam tape
- Tie a gingham ribbon into a knot and attach to center of card, wrapping ends around the back
- Layer the piece to a 5 1/2 x 8 1/2 folded black card
- Glue 4 flowers to the letter "O"
Credits: Clip art (unknown) - email me if you want the individual pieces, or the 4 pieces already set up on the page.
Copied from a card by Gina Hanson in Paper Crafts magazine, with slight variations
|
|
Baby Face (R124S)
- Cut black cardstock and fold to a 5 1/4" square card
- Attach layers as follows: 5" square cream with pink design, 4 5/16" square black, 4 1/4" square pink decorative paper, 3 1/2" square black, 3 3/8" square black and cream decorative.
- Trim photo to 2 1/2" square and attach to center with foam tape
- Tie dotted ribbon in a knot and glue above photo
- Create text and frame in graphics program and print on pink decorative paper
- Matt to black cardstock, trim closely and attach to card with foam tape
Credits: Cream paper with pink design (used pink fern brush to make design) (Dyan Cross); Black and cream decorative (Alma Townsend Girly)
|
|
Birthday Wishes (R125S)
I used digital papers and a digital element for this card, but you can use purchased items.
- Resize the taupe/white patterned paper to 500 wide, and make a selection, 500 x 325 pixels.
- Draw a thin pink line toward the bottom of the paper.
- Make a selection 500 x 175 pixels from the striped paper, and draw a thin pink line toward the top of the paper.
- Line up the papers in your graphics program and print on heavy text weight paper.
- Attach pink grossgrain ribbon at the seam between the papers, and attach to a 5 1/4" square pink card
- Print your Birthday element on photo paper, cut out, and attach to card with foam tape
- Attach a small pink silk flower in the top corner with a bronze brad.
Published in SSReflections On-Line Ezine
Credits: Anniversary Mini-Kit (Jennifer Beschinski); Striped paper (Dyan Cross); Birthday Wishes element (Dyan Cross)
|
|
Your Love is the Music... (R126S)
"Traditional Directions":
- Print text on 8 1/2 x 11" text weight paper
- Tape striped paper to text paper and put back into the printer to print the text on the striped paper
- Cut music paper to 5 1/4" square
- Cut a "wave" at the top of the striped paper, making sure text is centered, and attach at the bottom of the music paper, making sure the entire piece is 5 1/4" square
- Outline with gold leafing pen
- Tie sheer ribbon in a knot at the bottom
- Attach piece to a folded 5 1/2" square tan card
- Print clip art, trim to 2 3/4" square and outline with gold leafing pen
- Mat to tan cardstock and attach to card on an angle with foam tape
- Cut a small tag from tan cardstock and attach a strip of music paper down the center
- Set a gold eyelet at the top and tie through a piece of lace and sheer ribbon
- Attach to card with foam tape
- Glue a heart charm on tag
Digital directions:
- Open the digital template (image shown to the left) in a graphics program, resize to 525 pixels square, and insert the music paper in the top portion and the striped paper in the bottom portion
- Type text in Aeolus font on striped portion
- Fill the wavy line on the template with a complimentary color
- Delete all other layers, merge visible layers, and print piece at 5 1/4" square
- Continue from number 5 above
Credits: Template (manu-Germany); Music paper (Marcee Duggar - Digital Scrapbook Place; Striped paper (unknown); Greek Statue (clip-art)
|
|
Doves (R127S)
- Make a 5 1/2" square card from white shimmer cardstock
- Tear edges of green textured or mulberry paper and stitch around edges
- Attach green paper to card
- Tear white mulberry paper, then pink checked paper, and attach to card
- Print Doves and flowers on white textured cardstock, trim and attach to card with foam tape
- Glue 4 tiny pink buttons in corners of image
- Thread LOVE charm on thin pink ribbon, and glue ribbon and pearls to image
Credits: Green Digital Textured Paper-recolored (Tabby Lewis); Pink Checked Digital Paper (Laurie Farrar - Shabbyesque Design); Dove Clip art (unknown)
|
Romance Cards (this is page 5):
Newest
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Deborah March
Cards |
Scrapbook Pages |
Scrapping Projects |
Digital Techniques |
Stamping Techniques
Clay Techniques |
Booklets |
Jewelry |
Verses |
Framed Cards |
General Info
Stamps Info |
Links |
Home
|